Reply to thread

Help Support Flooring Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message

I recall installing that in medical and industrial space with epoxy adhesive. We'd have to chalk off 100-150 square feet at a clip and mix up two half gallon cans. I believe we used the full 1/16" square notch and you could go in right away but if you let it flash maybe 15 minutes there'd be less slip and ooze when you passed the roller. HAS to be 70+ degrees or it's not going to lay down even and you get seams and corners sticking up. The glue was dark grey, almost black.

[QUOTE="Incognito, post: 90222, member: 475"] I recall installing that in medical and industrial space with epoxy adhesive. We'd have to chalk off 100-150 square feet at a clip and mix up two half gallon cans. I believe we used the full 1/16" square notch and you could go in right away but if you let it flash maybe 15 minutes there'd be less slip and ooze when you passed the roller. HAS to be 70+ degrees or it's not going to lay down even and you get seams and corners sticking up. The glue was dark grey, almost black. [/QUOTE]

Verification