Pgiannakos
Member
Hello all, my names Pete and I’m DIY’er, not a professional floor installer. My current project is a stair retread project. I removed the existing carpet, cut off the bull nosing and installed white oak stairtek retreads with poplar retro risers. The stairway has two landings that I installed 3/4in white oak hardwood. I glued and nailed all of the parts. I used a tread jig to get as close as possible to the stringers, but unfortunately some of the stringers were bowed, mostly in the middle so I couldn’t butt up the tread exactly without a gap. I’ve attached pictures of some of the gaps. Long story short, what can I use if anything, to fill in those gaps where the treads meet the stringers? I plan on using a very light colored oil based stain that won’t change the white oak color that much. I also have a gap where the one board of meets the bull nosing on the landings. The nosing is a different brand then the landing flooring. Not sure if that’s the reason why they don’t lock in better. Should I try and fill that gap or leave it?
I was considering trying the timbermate wood filler in white oak or maple or a minwax filler. Will those eventually crack or shrink from the stress of the stairs and seasonal changes?
Would wood glue mixed with sawdust be better?
I know would fillers don’t stain that great and you’ll always see where it was applied, but since I’m keeping it a very light color I figured it won’t stand out much.
Any advice is greatly appreciated. Recommendations for a stain and poly are also welcome. This is completely new to me and im afraid of botching it. Thanks in advance guys.
I was considering trying the timbermate wood filler in white oak or maple or a minwax filler. Will those eventually crack or shrink from the stress of the stairs and seasonal changes?
Would wood glue mixed with sawdust be better?
I know would fillers don’t stain that great and you’ll always see where it was applied, but since I’m keeping it a very light color I figured it won’t stand out much.
Any advice is greatly appreciated. Recommendations for a stain and poly are also welcome. This is completely new to me and im afraid of botching it. Thanks in advance guys.
Attachments
-
3880D8A0-D524-424C-8396-23452D497F00.jpeg1.8 MB · Views: 14
-
AE1795EF-E25E-4208-A644-74462D476CE7.jpeg2 MB · Views: 0
-
35C5B8F4-423B-48A4-B117-875AAB35E7DB.jpeg2.4 MB · Views: 0
-
98C51997-60A3-4DC0-A8E3-FECEE3B68EFD.jpeg1.9 MB · Views: 0
-
8CFD812B-730B-4270-BFF5-E792DF4D29F1.jpeg1.8 MB · Views: 0
-
3209C483-E2EC-45BB-BC91-D9413444384D.jpeg3.8 MB · Views: 0
-
ED566E9A-DDD9-47D3-9EBC-9692FCABC158.jpeg3.4 MB · Views: 0
-
A16FA6A5-35ED-4256-9C1E-B0767B62A4BA.jpeg3.3 MB · Views: 0
-
48BC50E9-36D4-4CE7-B2CA-2D6764B8961C.jpeg1.5 MB · Views: 0
-
11154CE9-58B5-4D2A-959E-E242E41D4B3C.jpeg2.4 MB · Views: 0